Bore Guides – Group 5

Bore Guides – Group 5

$17.29

Bore Guides

SKU: CMPH-Bore Guides - Group 5 Category: Tags: ,

Description

Our bore guides are machined from a solid piece of delrin. This material is 100% solvent resistant. Our guides are designed to align the cleaning rod with the center of the rifles bore. This insures that no damage can be done by a jag or brush.

Our “O” ring guides are machined with a snout that extends into the chamber. This snout has a silicone “O” ring that seals off the chamber. This insures that no solvent can run back into the action or trigger.

Rimfire guides do not have a snout that protrudes into the chamber. We are unable to put a snout on because of the ejector inside the action.

Black Powder guides are threaded to screw into the action when the breech plug is removed.

Muzzle guides are designed for rifles that you can’t clean from the chamber end. Such as semi-auto’s.

The following guide numbers will fit the following actions.

Actions – Kleingunther and Weatherby Mach 5 (old Weatherby).

 

Please Note: The Bore Guides are made to order. Please allow minimum of two weeks for delivery.

Additional information

Weight 0.2 lbs
Dimensions 10 × 3 × 1 in
Caliber

22 and 6BR, 22-250, 243, 25-06, 257Rob, 6Rem., 250 Savage, 6.5×55, 7 and 300 Standard Mag., 7-08, 308, 270, 280, 30-06, 7BR, 71HMSA, 7×57, 8×57, 30×378, 338×378, 378 Wby, 338 Winchester, 7 and 300 Ultra Mag.

Reviews

There are no reviews yet.

Be the first to review “Bore Guides – Group 5”

Your email address will not be published. Required fields are marked *